"The material does not completely represent the price. Even the panel furniture may be more expensive than the solid wood furniture. The material does not represent the quality. The quality of the inferior solid wood furniture cannot be compared with the excellent panel furniture. Say so. Many people think that panel furniture should be cheap, and even think that panel furniture is synonymous with low-end furniture. Panel furniture In fact, high-end panel furniture is more expensive than solid wood furniture in minutes. For example, Zhimi Milan International, Frantis, Yufeng, a group of living room audiovisual cabinets cost about 20,000 yuan, which is not new to them.
Solid wood veneer furniture: market volume is not easy to ignore
Before the implementation of the "General Technical Conditions for Wooden Furniture", not many people called solid wood veneer furniture as solid wood furniture. It is in the visible range of the furniture surface, including the surface and frame structure are pure solid wood (such as using unknown Wood), but only solid wood veneer (such as teak wood, ash and other expensive solid wood veneer) is attached to the solid wood. The reporter found in the market that although there are not many such furniture, it is very concealed, and many promoters recommend it to consumers as all-solid wood furniture.
Disadvantages: the most important process
　　 Solid wood veneer furniture pays attention to craftsmanship. If the craftsmanship is not refined, the veneer can easily foam or even fall off. When consumers buy furniture, they must ask in detail, and then see if the craftsmanship is smooth.
Â
Advantages: cheap price
Viewed only from the outside, there is no difference between solid wood veneer furniture and the first two kinds of solid wood furniture, but in fact, solid wood veneer furniture has the lowest material cost, so the price should be relatively cheap. The solid wood veneer furniture has the most beautiful lines and the design is more simple and fashionable. Among the solid wood furniture, it is the most cost-effective product.
Â
Identification method: take a closer look at the wood grain scar
It is not difficult to identify the type of "solid wood furniture". Generally speaking, in order to express the true texture of wood, manufacturers usually only apply varnish or matte paint on the surface.
First look at the edge banding. All solid wood furniture is made of solid wood, so there is no edge banding. Then look at the wood grain and scars.
From the appearance, solid wood furniture is completely the same as all solid wood furniture , without edge banding. The natural wood texture, feel and color are exactly the same as all solid wood furniture. However, if you look closely at the material of the partition, side panels, bottom or top, you will find that the wood grain is completely different from the main wood grain, because in these parts, it uses other wood with lower cost. If the board is combined with wood furniture, although the wood grain is the same, there may be no scars
Careful observation on cabinet doors and countertops, if you find that the wood grain is different, or there are no scars at all in concealed places, you can be sure that this furniture is solid wood veneer furniture.
Rich expressions of panel furniture
Sheet furniture is a piece of furniture that is made of artificial sheet material and connected by hardware. Common artificial boards include plywood, blockboard, particle board, and MDF.
Common finish materials for panel furniture are thin wood (commonly known as veneer), polyester lacquer (commonly known as baking varnish), wood grain paper (commonly known as sticker), and PVC sheet. The latter two finishes are usually used for low-end furniture, while natural veneer finishes and piano paint are used for high-end products. At present, the veneer of some panel furniture on the market is becoming more and more realistic, and the gloss and feel are good. The technology of piano paint is becoming more and more sophisticated. Of course, the price is also very expensive.
Advantages: outstanding appearance
Panel furniture is popular mainly because it has a variety of appearances, novel styles, bright colors, clear wood grain and no deformation, cracking, mothproofing, and moderate price. It has become a new family in the furniture category. It can be said that panel furniture has more changes in appearance design and more individuality. Most modern furniture sold on the market today is this type of furniture. The combination of panel furniture usually uses a variety of metal hardware, which is very convenient for assembly and disassembly. Panel furniture with high processing accuracy can be disassembled and installed many times.
Disadvantages: not environmentally friendly
The shortcomings of panel furniture are mostly not environmentally friendly. For example, some manufacturers use chipboard and other materials to produce, and if the veneer is not fully covered, it is easy to release harmful formaldehyde. Furniture produced using man-made boards with excessive formaldehyde will cause indoor environment pollution. Consumers should pay attention when buying, you can open the cabinet door or drawer to smell, if there is a strong irritating smell, it is mostly formaldehyde exceeding the standard, it is not suitable to buy.
　 How to identify panel furniture
The first step in judging the quality of a panel furniture is to identify what kind of board it uses. Open the door of the cabinet and observe carefully in the hinge slot and the eye-opening, you can see whether the material of the panel furniture is MDF or particle board. In general, the internal structure of the hinge groove and the punching area are exposed. The cross section of the particle board is similar to a honeycomb, the structure is coarse, the internal structure of the MDF is uniform, and the density is moderate, so it is easy to see whether it is particle board or MDF.
Stickers refer to chemical decorative panels such as melamine sheet, wood grain paper, etc. on the surface of the plate. Jianwei's white oak series, red apple, Hong Kong dynasty, and Jiahao He room are the most exquisite in the sticker furniture, which is almost real. To the point.
The baking process is getting more and more advanced
In the low-end panel furniture, you can also see the traditional painting process. The mid-to-high-end panel furniture is mostly painted. The best currently is piano-painted panel furniture, which is also the most commonly used surface technology for panel furniture.
The base material of the paint furniture is generally MDF, and the surface is polished, primed, dried and polished. There are three types of bright, matte and metal paint. The advantages are bright color and strong visual impact; moisture resistance and waterproof performance superior. Easy to clean, no oil leakage, no fading. (Litian)
Kylin Chemicals manufactures and supplies a selected range of high performance and eco-friendly biocides & disinfectants, meanwhile, provides tailored solutions to meet our customers needs at new product & technology development, problem-solving in application, and cost-reduction, etc.
There are many healthy Ingredients including glutaraldehyde low methanol,dow corning 5700,didecyl dimethyl ammonium chloride,dioctyl dimethyl ammonium chloride.
Our biocides and disinfectants are used in a variety of applications, including detergents & cleaners, indutrial cooling water treatmetn, oilfield water treatment, pool water disinfectants, aquaculature & poultry house disfection, etc.
Quaternary Ammonium Biocides & Oxidizing Antimicrobials
Quaternary Ammonium Biocides,Oxidizing Antimicrobials,Benzododecinium Bromide,Benzethonium Chloride
Kylin Chemicals Co., Ltd. , http://www.kylin-chemicals.com