When a new house is renovated, it is necessary to make changes to many places that are “inconvenientâ€. The location of toilets is often a problem. Then you think about whether you can move the toilet position? Of course it is OK to move, but you can't mess it up, otherwise you may often have to use a toilet bowl to appear in the toilet. So how can the toilet be shifted? What else needs special attention? If your toilet is in the way, check it out.
What are the methods for toilet shifting?
Distance is different, and the method of shifting is different
1, long-distance toilet shiftWhen the equipment is modified, some friends will consider adding a bathtub in the bathroom, but if a small area of ​​bathroom space is to be installed under the bathtub, the position of the toilet should be considered. In terms of moving distance, it often exceeds the range of use of the toilet shifter, so when the renovation is felt, the floor of the bathroom must be raised, and a water bend is added to prevent the backflow of the odor. In general, the diameter of an ordinary drain pipe is about 110mm, so the ground is too high to be at least about 120mm. At the same time, there is room for the cement mortar and the slope of the downpipe.
However, the elevation of the bathroom floor not only affects the overall aesthetics of the bathroom, but also brings some inconvenience to daily use. Therefore, in the face of a larger range of toilet shifts, there is a way to reopen the hole. There is no technical problem with the opening of the floor, but it must first be approved by the downstairs occupants before proceeding. In addition, the wall-type toilet can be used to walk along the wall, so that the hidden work of the pipeline can be handled without the need to raise the ground.
2, small distance toilet shift
For toilets that require a small range of movement, we can use a special toilet shifter to make adjustments. In general, the position of several toilets in the bathroom should not be touched as much as possible, and the toilet shifter should be used within the range of less than fifteen centimeters to move, and jamming may not occur. The toilet shifter is a kind of pipe fitting used to understand the sewage outlet of the toilet and the sewage discharge pipe under the condition that the interfaces of the two toilets do not correspond, so that the toilet sewage outlet and the sewage discharge pipe can complete the docking.
It is worth noting that the larger the range of toilet shifter movement within the allowable range, the greater the required slope, so the installation of the toilet shifter is to be installed before the bathroom tile is installed, and some even need to be installed. Shave the ground or raise the ground.
Second, toilet shift need to pay attention to what?
Displacement of toilet According to different situations, the precautions are different. Usually there are three kinds:
1, the use of toilet shifter
In this case, the main consideration is whether the toilet pit is suitable. Need to adjust the position of the toilet, generally within 10cm can be moved, but also to prevent the toilet blocked the problem. Can not use it as much as possible.
2, sunken toilet
Toilet changes are more diverse. This is more convenient. Listen to the opinions of the masters and change them.
3, change the location of the sewage pipeline
This need to discuss with the occupants downstairs, change the location of the sewer, under normal circumstances, make a big elbow downstairs at the top, this is much better than using a shifter, basically not blocked. But be sure to re-waterproof after changing the location of the water pipe. Closed water test also needs to be done. Suitable for small distance changes.
The above is the method that Xiao Bian has collected and arranged for several toilet shifts. According to the specific conditions of the family, we should refer to the above points that require attention. This way, your toilet “behind the law†can be “obedientâ€. Of course, if your toilet does not move, then you try to accept this "noisy" it.
Install toilet
1. All steel fabric parts and the size of Prefab House can be made according to clients' requirement: cheapest prefab house| prefab house.
2. The prefab house is low cost, durable structure, convenient relocation , and environment-protection.
3. The material of prefab house is light and easily to installation. one 50 square meter house five workers 1-3days finished installation, save manpower and time.
4. All the materials of prefab house can cycle-use, Meeting the require of environment protection in the world. Special is in the large-scale house projects in the developed region.
5. We used the high quality galvanized sheet and foam as the materials of the wall and roof .So the prefab house is good for fire proofing, water proofing, etc.
6. Support frame system of steel prefab house: Q235B China stander steel structural. Square tube, Channel steel, etc.
Prefab House
Small Prefab Homes,Prefab Homes,Prefab Houses,Prefab Modular Homes
Jinan Zhengtang Insulation Decoration Material Co.Ltd , https://www.ztwallsiding.com