The polished brick is a kind of bright brick which is polished by the surface of the whole body brick body, and is a kind of whole body brick. Compared with the whole body brick, the surface of the polished brick is much smoother, and the polished brick is hard and wearable. It is suitable for use in most indoor spaces except toilets and kitchens, such as for balconies and exterior wall decoration.
First, the purchase method:
1. Choose brand products that match your favorite interior design style and decoration budget;
2, touch by hand, personally feel the physical properties of the surface, such as texture, weight, hardness;
3, observe with the eyes, carefully observe whether the product surface gloss, color, pattern, texture, etc. are natural and harmonious;
4. Check the inspection report provided by the merchant to understand important indexes such as water absorption rate, flatness, wear resistance and radioactivity;
5. Understand the strength of production enterprises and the scientific and technological content of products to ensure the stability of product quality;
6. Understand the production enterprise service system and merchant service system to ensure that you can enjoy high-quality full-service.
Second, the important indicators to measure the quality of polished tiles:
1. Water absorption rate
Water absorption is one of the most basic performance indicators of ceramic tile products. It is expressed as the percentage of the mass of dry bricks in the open pores of ceramic tiles.
The lower the water absorption rate of the polished brick, the denser the structure, the less the capillary pores, and the less likely to stain.
Of course, the water absorption rate is lower, and there is still a water absorption rate. As long as there is a capillary hole in the water absorption rate, there is a possibility of bleeding.
Therefore, the antifouling treatment of polished tiles is very important. The so-called anti-fouling treatment is to use the anti-fouling products to close and fill the pores of the brick surface. Most enterprises adopt a layer of anti-fouling wax on the surface of the polished brick to solve the problem of infiltration during the decoration process. And it is very troublesome to remove wax.
2, hardness
The higher the hardness of the tile, the more wearable the surface, the less scratches, and the longer it is new. At the same time, the lower the water absorption of the tile, the higher the porcelain, the denser the inner structure and the higher the hardness.
3, gloss
The gloss is related to the density of the polished tile and the length of the polished brick process and the firing curve. The higher the density and the degree of porcelain, the higher the gloss of the thrown brick; the longer the same brick, the longer the polishing time, the higher the gloss it is good.
4, firing time
The same 100-meter-long kiln, the general factory usually burns for 40 minutes, and the brand manufacturers usually burn for 70-80 minutes. The concrete performance is as follows: the brick of the ordinary factory is dull, the surface is flawed, and the texture is loose; the high-grade brick is bright and beautiful, the light is shining, and the texture is fine and lubricated. If the front is not easy to compare, turn to the back and the good texture bricks look oily.
5, size
The national standard is 800MM brick error soil 1MM, and manufacturers with good quality can be lower than this standard.
Third, polished brick paving maintenance
The national standard is 1.52 meters and there is no obvious color difference. The quality of the soil produced by the brand manufacturers is good and stable, and the process has 23 iron removal processes. The testing standards are strictly in accordance with national standards, and the overall paving has no color difference.
Polished tiles are commonly used in home decoration. The surface is smooth, bright and good in texture, especially in spacious halls. How to lay and maintain polished tiles?
Inspection: Pay attention to the color code and actual size of the variety on the outer packaging when paving. A certain number of bricks can be taken during the inspection. First, try to shop in an open space, and stand at a position of about 3 meters to check the appearance quality such as color number, size and flatness.
Before the paving: Apply a layer of floor wax or anti-fouling agent before the paving to prevent suction. Brick surface antifouling agents are removed after all construction work is done after sanitation.
Paving: Soak the bricks in clean water for about 15 minutes, pick up the water to be surfaced and then carry out the construction. In order to obtain the most satisfactory paving effect, it should be laid in the same direction according to the product pattern feature or the back logo pattern. The leveling adjustment can be adjusted by 180 degrees, and the 90 degree direction is prohibited.
Fourth, the maintenance of polished tiles
1. When cleaning the mopping floor daily, please use dry mop as much as possible, use less wet mop, local dirty or smudge, use household cleaning agent, such as detergent, washing powder, etc. or use Dongpeng decontaminant to clean, and Apply the floor wax regularly or irregularly according to the usage. After it is dry, smear it to keep the brick surface bright and new.
2. Before the polished bricks are used before being laid, in order to avoid damage to the brick surface during construction of other projects, the woven bag and other items that are not easy to be decolored are protected, and the brick surface is covered.
3. If you need to use the nail air compressor on the paved brick surface, apply the wooden board and other objects to cushion the air compressor. It is strictly forbidden to directly touch the brick surface of the air compressor to avoid the brick caused by the vibration of the air compressor. The influence of the face.
Solar Ground Mounting System includes Ground Screw Mounting System and Concrete Base Mounting System. Ground Screw mounting system is consist of ground screw and U shape steel and the main material is Q235, surface treatment is hot-dipped galvanized and the useful life is 25 years. Concrete base mounting system is applicable for the array system on the open fields and different foundation solution , it will have different install accessories, such as concrete with bolt and ground screw, the material of this system is hot dipped galvanized steel and anodized aluminum alloy with great anti-corrosive suitable for outdoor using.
Solar Ground Mounting System, Ground Screw Mounting System, Concrete Base Mounting System
Hebei Honde Industrial Trade Imp&Exp Co., Ltd. , http://www.groundscrewpile.com