Jiangtai new sand making machine uses anti-friction bearings to effectively extend equipment life

Nowadays, because of the increasing complexity and skill of the equipment manufacturing industry, the parts and components of the machinery manufacturing industry have gradually been upgraded to dozens or even more. Because of the variety of equipment requirements, the differentiation of customer requirements for equipment is very clear. In response to these features, Jiangtai sand-making machine bearing has cooperated with well-known domestic bearing suppliers, and has provided technical support for other bearing equipments with years of spare parts processing experience accumulated in the mineral processing machinery manufacturing industry.

Bearings are primarily used for support in terms of their effect, that is, literal analysis is used to support the shaft, but this is only a part of its effect, and its nature is that it can bear radial loads. It can also be understood that it is used to fix the shaft. It is the fixed axis that makes it possible to complete the transformation and to control its axial and radial movement. The result of a motor without a bearing is basically a mission.

Since the shaft can move to any bias, the shaft of the motor requires only a transition during the task. Theoretically speaking, it is impossible to complete the effect of the transmission, not only that, the bearing will also affect the transmission, in order to reduce the impact on the high-speed shaft bearings must achieve superior smoothness, and some bearings have their own smooth, called pre-gloss bearings, Most of the bearings must have smooth oil, and they should be used at high speeds, because friction will not only add energy consumption, but even more terrible will easily damage the bearings. The idea of ​​changing the sliding friction to rolling friction is unilateral, due to a variety of devices called sliding bearings.

The bearings of Jiangtai sand making machine are mainly used to fix the hammer head, jaw plate or impact plate, so that it can be well with the motor. In addition, the bearing is also a required component because the sand making machine is mostly connected with the driver by twisting. The bearing smoothing skills used in Jiangtai sand making equipment mostly use smoothing agent and smooth oil, which can effectively reduce the wear between machines and improve the service life of the equipment.

This article was edited and published by Jiangtai Heavy Industry Machinery Co., Ltd. Jiangtai Heavy Industry specializes in the production of energy-saving sand making machines, river pebble sand making machines , and high-efficiency and energy-saving sand making machines.