Pipe flange separators are widely used in the pipelines of various projects in the machinery industry, construction and so on. The pipeline flange separator is portable and can be operated by one person. It is suitable for narrow spaces and high-altitude operations. It can reduce labor intensity and has a wide range of applications. It also improves efficiency under the premise of convenience and safety. Next, let's take a look at a very practical tool such as pipeline flange separator!
Â
　　 Parameters and characteristics of the separator pipe flange
Â
1. The maximum separation force of UFS-150 is 15 tons, and the maximum separation force of UFS-150D is 2 * 15 tons;
2. The minimum separation gap is only 6mm;
3. The maximum separation is up to 65mm;
4. The arc steps with a radius of 150mm can be deeply and close to the flange, so that each step can bear a greater load;
5. Forged alloy steel separation steps, longer life;
6. Lightweight reinforced plastic handle design, easy to carry;
7. Unique internal locking mechanism to ensure that the separation piece is close to the flange when it is opened, and it will not expand excessively, and automatically returns to position when closed
8. Integrated design, no need to connect the tubing, more convenient to use.
Â
　　 Advantages of pipeline flange separator
Â
The spring-retractable oil cylinder, pump and separator are integrated into one. Only 6mm can be operated, each step is separated by 25mm. Automatically retracts when closed. No radial force and no squeeze. The maximum pressure is 10000PSI , and the oil is returned under overpressure. Overcome space limitations. At the same time , it prevents the flange from being misaligned. Large separation force and light body. Increase the separation and reduce the depth of the wedge block inserted into the flange. Can be used as a jack.
Â
　　 Operation specification of pipeline flange separator
Â
1. When operating the flange separator, first of all, strict labor protection dress system.
2. Before use, you must check whether the joints between the hydraulic pump separators of the manual pump are tightly connected without leakage, and it is strictly forbidden to operate the separator when the systems are not fully connected and fastened.
3. It is strictly prohibited to press against unconnected quick connectors.
4. When operating the manual pump, the operator must stand on the side of the pump, away from the range of resilience of the handle.
5. When operating the hand lever of the manual pump, it is strictly prohibited to artificially lengthen the handle of the pump.
6. When operating the manual pump, the manual pump must be placed horizontally.
7. Ensure the stability of the mounting parts before lifting the load.
8. When there is no load, the oil pump works in the first stage of large flow. When the load is connected, the oil pump automatically switches to the second stage to establish the pressure. The medium-speed operation handle is used. The faster operation speed will cause the oil pump to suck oil insufficiently.
9. When the separator is used as a device for lifting loads, it is strictly forbidden to use it as a supporting device, and it is strictly forbidden to use the separator as a pad in the state of lifting or squeezing.
10. When lifting the load, never exceed the rated load.
The above is the content about pipeline flange separator introduced for everyone. When using pipeline flange separators, the load force must be distributed to the entire saddle surface. Always use the saddle to protect the piston rod. If the load force line does not pass through the center of the cylinder piston rod, the eccentric load It will cause large tension on the cylinder and the piston rod, and the deviation of the load will seriously damage the outer separation block and cause the outer separation block to be damaged.
Pharmaceutical Intermediates,Cytidylic Acid 99%Min,White Powder Alareline Acetate,2-Acetylpyrazine 99%Min
Henan Tianfu Chemical Co.,Ltd , https://www.tianfuchem.com