Yesterday morning, in the Shaying section of the 325 National Road in the central city of Lecong, when the staff cleared a 2,300 square meters of used furniture city, it suddenly caused a fire. After the fire broke out, thousands of residents such as nearby dwellings and furniture towns were evacuated to safety. The bosses of the nearby furniture city rushed to transport furniture, causing a traffic jam on the 325 National Road. The fire lasted for about 3 hours and the accident did not cause any casualties. When the fire broke out of the house, the wood caught fire at 10 am. When the reporter came to the Shajiao intersection of the 325 National Road, he found the fire in the Qianlong Furniture City on the west side. The fire-fighting furniture city has two floors and has nearly collapsed. Five fire trucks came on the scene. Under the cover of the fire water gun, an excavator rushed into the fire at high temperature and pushed down the wall of the house more than ten meters high. At 12 o'clock in the afternoon, the large furniture city was razed to the ground, leaving only the scrap iron frame and black charcoal that were burnt. The fire-fighting furniture city is surrounded by a number of furniture cities. Many furniture store owners are afraid that the fire will continue to spread. They are rushing to pick up valuable wooden furniture and leather sofas. The reporter saw that in the section of the exit of the furniture city, several large trucks had scratched the road, causing traffic jams on the road. The owner, Mr. Wang, told the reporter that the fire-fighting and disused furniture city was scheduled to be demolished yesterday. A few days ago, after they received the notice, they all shipped the furniture in the store, so they did not burn valuable furniture. At 9 o'clock in the morning, when the staff burned and dismantled the house, the waste wood suddenly burned up and then triggered a raging fire. After the fire broke out, residents of a row of four-storey private houses backed by the furniture city were evacuated to safety. According to the on-site commander, the fire site was a brick wall, a tin roof, and a wooden furniture store with a partition structure. The fire was caused by the burning of a large number of wooden materials in the house. According to the Lecong Town Government, there was a fire at the site of the A1 seat of the Qianlong Furniture City in Lecong Town. There were no casualties in the fire incident. The loss was to be counted and the cause of the fire was to be further investigated.
V-Profile Press fitting pipeline system is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc.
Compared with traditional pipeline system, it`s not only more economical, safer and healthier, but also easier and faster for installation with longer service life.
1. Press fitting range:
Coupling -- Equal coupling, Reducing coupling, Slip coupling, coupling with male/ female threads;
Elbow -- Equal elbow, Elbow 90°, Elbow 45°, Reducing elbow, Elbow with plain end, Elbow with wall plate, and Elbow with male/ female threads;
Tee -- Equal tee, Reducing tee, Tee with wall plate, and Tee with male/ female threads;
Others-- Pipe cap, Pipe Bridge and Flange connector.
2. Material: Stainless steel 304L, Edelstahl 1.4306/ Edelstahl 1.4301, AISI304L, Inox304L;
Stainless steel 316L, Edelstahl1.4404, AISI316L, Inox316L;
Galvanized carbon steel, 1.0034C-Stahl, Kohlenstoffstahl, ACCIAIO AL CARBONIO.
3. Size: 3/8``-4``inch or as request, pipe wall thickness: 1.0--2.0mm
Sizes range:
DVGW W534:1995: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.
JIS G 3448-1980: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.
4. Standard:
Press fitting standard: (DIN) DVGW W534-1995; (JIS) JWWA G116:2001; GB/T 19228.1-2003
Pipe standard: DIN10312:2003; GB/T 19228.2-2003
O-ring sealing standard: CEN EN 681-1:2006; GBT 19228.3-2003
5. O-Ring Seal: "Chlorinated butyl rubber" (CIIR), EPDM, HNBR, NBR and FKM, etc.
EPDM (black): max working pressure 16bar, working temperature from -20℃ to 120℃, Suit medium: cold and hot water, compressed Air etc.
6. Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.
7. Anneal: all stainless steel pipe fittings are annealed in inert gases before packing.
Installation and Connection Order
Equipments And Quality Control
Orderly Workshop
Efficient Anneal Equipment
Pressure Testing
Tensile Testing
Stainless Steel V-Profile Press Fittings(JIS)
Stainless Steel V-Profile Press Fittings,Equal Tee Press Pipe Fitting,V Profile Steel Elbow Press Fitting,V Profile Female Tee Press Fitting
WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , https://www.kasinvalvefitting.com
