Core Tip: Dry spray and wet spray effect of silver powder paint:
1. What is dry spray-spraying paint film drying faster, silver powder does not have enough time to settle down (high spray pressure, long spray distance, fast moving speed, quicker drying, shorter standing time) The surface temperature of the sprayed plate is higher, the oil output is less, and the spray width is larger.
2. What is wet spray? The spray paint film is slow to dry, and the silver powder has enough time to sink into the bottom of the paint film (the spray distance is close, the slow drying diluent is used, and the standing time is longer). Wet spray effect - Silver powder sinking in the paint layer is straighter and smoother at the bottom, the front color is darker and the side color is lighter.
Reasons that affect color mismatch:
1. The age of the body color
2. Color hiding ability
3. Vehicle cleaning (pollution)
4. Light
5. Color
6. Blending
7. Method of testing color
8. Silver powder paint spraying method
Concerned about surprises
Label: dry spray wet spray effect of silver powder paint
Previous: How to properly use the floor heating intelligent thermostat Next: SKF bearings have the advantage of grease or oil lubrication
General Purpose Powder-Actuated System is used for building fastening, which have three parts: Actuated tools, Cartridges and fasteners. When Actuated Tool strikes cartridge and cartridge will explode in the inner of tools and produce a lot of high temperature and high pressure gas. The gas will push the piston and the piston will push the fasteners into the basement. Or the gas will push the fasteners directly into the basement. Like this, we can fix a lot of things into concrete and steel basement tightly.
The fundamental is as the following:
The Actuated tools are classified for direct tools and undirect tools, we can also called high velocity and Low velocity tool, the fundamental is as the following:
High velocity tool:
Low velocity tool:
Based on different purpose, Cartridges are classified for different calibers and dimensions. The usual caliber and dimension is as the following:
.27calX11mm(S1)
.22calx15mm(S5)
.22calx16mm(S52)
.27calx18mm(S3)
.25calX16mm(S43)
At the same time, each caliber cartridge is classified for different specification based on the quantity of inner powder, which is marked by different color. when the color is more darker, the power level is stronger. otherwise, the power lever is lighter.
The fasteners are classified for different categories. Each different category is classified for different specification based on different length and diameter. At the same time, it is can also be re-designed based on special use.
The packages are as the following:
1. Tools: one tool/ plastic box/carton or five boxes/carton
2.Cartridge: 100pcs/paper or plastic box, 100boxes/carton.
3. Fasteners: 100pcs/paper box, XX boxes/carton.
For shipment, all cartons will packed by pallet.
General Purpose Powder-Actuated Systems
General Purpose Powder-Actuated Systems,Powder-Actuated Systems,Powder Actuated Fasteners,Powder Actuated Fastening System
Yibin Heheng Technology Co.,Ltd , https://www.chinadirectfastening.com