Magnetic lock
Open or open: the direction of opening the door. Most of the glass doors belong to the outside, and the iron doors are open and open. The opening of the inner opening will result in different magnetic locks and different installation methods. Therefore, when selecting the magnetic lock, it must be determined whether the door is open or open.
Tensile force: The magnetic lock is divided into several levels according to the tensile strength: 150, 180, 270, 300, 500, etc. The tensile strength directly determines the safety level of the system and the price of the product. Therefore, the parameter must be specified when selecting the magnetic lock.
Lock status: Whether the lock status is one of the important parameters of the magnetic lock. For the magnetic lock without lock state, its power consumption is large, and the temperature of the lock body is high. If the heat dissipation effect is poor during installation, the service life of the lock body can be shortened. In addition, the lock state can be used as a basis for the controller to judge the door open timeout alarm.
Electric lock
Lock status: Whether the lock status is one of the important parameters of the electric lock. For the electric plug lock without lock state, the normal current is the same as the current when the bolt is actuated, the power consumption is large, and the lock body temperature is high. If the heat dissipation effect is poor during installation, the service life of the lock body can be shortened. The normal current of the electric plug lock with the lock state is equivalent to less than half of the operating current, the power consumption is small, the lock body temperature is low, and the service life is long. In addition, the lock state can be used as a basis for the controller to judge the door open timeout alarm.
Delay adjustable: The so-called delay refers to the length of time from when the lock is opened, and the electric lock is locked again after the person enters the door. If this time range is exceeded, the door open timeout alarm signal will be generated.
Positioning Beads: Positioning beads are sliding beads that help position the door when the door is back. The general glass door adjusts the smoothness and accuracy of the door body by adjusting the ground spring, and the wooden door controls the door body to return to the position through the door closer. Therefore, the positioning of the beads is not so great. At the same time, the friction noise generated by the positioning beads is also large, which affects the office environment of the office area.
Electric lock installation accessories
In most cases, the electronic lock installation must use some accessories. When selecting the electric lock, the user should clearly describe the specific door condition and installation requirements. The following is a detailed description of several accessories that may be used in the installation of electrical locks.
Lower door clamps for electric plugs: When the glass door has no frame, the lower door clamp must be used. The lower door clamps are generally made of aluminum alloy and are directly clamped to the door glass.
Upper and lower door clamps for use with electric mortise locks: When the glass door body is top and bottom without glass, the upper and lower door clamps must be used. Since the upper door clamp requires that the electric plug body be wrapped and fixed on the glass, the quality of the upper door clamp is very good, and the volume is large, and generally stainless steel is used. At the same time, the lower door clamp must be matched with the upper door clamp, which is different from the separate lower door clamp. Upper and lower door clamps are more expensive.
L-bracket with magnetic lock: When the iron gate is opened, it is often necessary to choose an L-shaped bracket. Most of the brackets are made of aluminum alloy.
U-shaped bracket matched with magnetic lock: U-shaped bracket must be used when the glass door has no frame. The bracket is mostly made of aluminum alloy.
The anode lock body matched with the cathode lock: the lock body is generally a mechanical anti-theft lock, and the lock tongue cannot be a square tongue.
Industrial Grade Salt
Sea Salt has hundreds of industrial applications. It is very
widely used in chemical
industries, for example, the Chlor-Alkali
industry, which uses chiefly
salt to manufacture chlorine
and caustic soda. Chlorine and caustic
soda are used further in the manufacture of paper. It is also used as a water softener. Soft water can more economically use soap and detergent, and is therefore ideal for cleansing purposes. Rubber manufacturers use salt to
separate rubber from latex. It is used in the metal industry to remove impurities from metal. We produce A
and B Grade Sea Salts for such industrial uses.
Another major use of salt is de-icing, removing ice from
a surface. Although rock salt is the more common type of salt for this purpose,
sea salt is also perfectly suited to perform the task. This works by spreading
diluted salt over the frozen surface. Since salt water has a lower freezing point than pure
water, ice melts away as
soon as it absorbs salt. We produce a C Grade Sea Salt for de-icing purposes.
Industrial Sea Salt,High Level Industrial Salt,Water Softener Salt,A Grade Industrial Salt
Weifang Xinchang Chemical Co.,Ltd , http://www.xinchangchem.com