Ballast
General ceiling brand ballast design life is short, easy to produce noise and strobe. The professional ceiling companies will fully consider the optimal ratio of the parameters of the lamp and the ballast. The ballast adopts the brand-name energy-saving electronic ballast and has an automatic protection function for abnormal conditions. For example, the electronic ballasts of fluorescent lamps used in industry standards have low power consumption, which reduces the total input power of the lamp by about 20% and has a better energy saving effect.
The constant power of the electronic ballast used in the professional illuminator, the decrease of the lamp current, and the reliable starting point can prolong the lamp life.
The electronic ballasts used in brand ceiling luminaires have a more reliable starting point, and succeed once after the preheating of the lamp tubes, avoiding multiple starting points and stabilizing the input power and output luminous flux.
The electronic ballasts used in professional lighting can reach a noise level of up to 35 dB. Normally, people cannot feel the noise.
2. Tube
Ordinary lamp color temperature is generally 10000 --- 25000K, lamp brightness is not great, and quite dazzling.
The color temperature of the professional ceiling lighting tube is 6400k in standard value. The visual light is soft and even, which can effectively protect eyesight. The color temperature and light efficiency of the lamp are important when purchasing lighting. Professional integrated ceiling lighting is generally used three-color energy-saving lamps, standard water powder coating process, rather than inferior halogen powder lamp. For example, T5 energy-saving lamps with rare-earth trichromatic phosphors have a 5% increase in efficiency compared to ordinary lamps and halogen tubes.
3. Lighting mask
The brand ceiling standards generally use imported acrylic panels and glass panels. This high-transmittance acrylic lampshade plate is uniform in thickness and has anti-ultraviolet rays and excellent heat resistance. Therefore, not only the light transmission performance is good, but also long-term use is not aging, no deformation, no fading.
General brand luminaire masks are usually made of benzene and ABS. The material produced by this material has poor light transmission performance, and it is prone to aging, discoloration, and fading after a long time.
Therefore, in the choice of lighting, the appearance of the style is certainly important, but do not be confused, lighting performance is more critical, the key to grasp three points: long life, no flicker, no noise.
Ceilings, integrated ceilings, ceilings, optional lighting glass, craft glass
Graphite Petroleum Coke,Graphitized Petroleum Coke,Petroleum Coke,Graphite Pet Coke
Pingluo Zhongxing Carbon Co.,Ltd , http://www.ztecarbon.com