The background wall decoration design occupies a very important position in the home improvement and is commonly used in the living room, living room and master bedroom. Usually the walls of the living room and living room are often considered in combination with television and stereo, which is also the need of modern life. The background wall decoration design can make the finishing touches the decoration style of the entire home, as well as the cultural taste of the homeowner. Now mainly introduce the construction points of the TV background wall:
It is produced in a variety of ways, including gypsum board modeling, aluminum-plastic panel, Malay paint, paint color modeling, wooden paint modeling, glass, stone modeling, and wallpapering.
>>> Links: Using the TV Background Wall to Discover the New Space in the Living Room
The following points need to be considered in the design and construction of TV background walls:
Consider wiring
If it is a wall-mounted TV, the wall should have a position (pre-embedded or strong base) and enough sockets. Recommendation: Bury a thicker PVC pipe, all the wires of DVD line, closed line, VGA line, etc. can be passed through the pipe to the lower TV cabinet. .
Consider the width of the living room
The best distance from the human eye to the television is 3.5 times the size of the TV, so don't make the video wall too thick, waste valuable area indiscriminately, and even cause the distance between the person and the TV to be too close.
Consider the position of the sofa
After the position of the sofa is determined, the position of the television is determined, and then the size of the television wall is determined by the size of the television.
Consider the echo of light
The TV wall generally echoes with the top part of the ceiling. There is usually a light on the ceiling, so we must consider the modeling of the wall and the lighting. We must also consider not using strong light to illuminate the TV and avoid eye fatigue when watching the program.
Consider the location of air conditioning outlets
Some room air conditioner outlets are just on the wall of the TV background wall. In this case, when the woodworker is making TV walls, it is necessary to be careful not to seal the air conditioner outlets inside the background wall. The outlets need to be removed first.
Consider the thickness of the floor tiles
When constructing the wall surface, the thickness of the floor tiles and the height of the baseboard should be taken into account to ensure coordination of the various shapes. If there is no baseboard for the design, the installation of the panel and gypsum board should be performed after the construction of the floor tiles to prevent moisture. .
TV Living Room Outlet Living Room Background TV Wall Living Room TV TV Renovation Living Room Master Bedroom Renovation Decoration Style Cloth Sofa Glass Tile Bedroom Bedroom TV Background Wall Decoration Home Bedroom Lamp
Features
1. In the cable laying process, it can support the cable and change the sliding friction into rolling friction between cable and support, which means it can reduce pulling force.
2. Straight pulling roller is used in the straight line segment of cable laying. Generally put one roller every 2-3 meter.
3, Corner pulling roller is used in the turning point of cable laying. The amount of corner pulling roller in the turning point is determined by the side pressure and cable bending radius.
Usually used in laying path of cable tray, well head, upper and down slope and control cable.
Notes: When operating, the roller should be fixed in ground or other supports.
Cable Roller,Corner Roller,Hoop Roller,Cable Guide Roller
NINGBO MARSHINE POWER TECHNOLOGY CO., LTD. , http://www.marshine-power.com