The rear-end accident rescue of Shanghai Metro Line 10 is underway

A rear-end accident occurred on Shanghai Metro Line 10 Shanghai subway operation information, at 14:00 on September 27, Shanghai Metro Line 10 due to equipment failure, Nanjing East Road to the Jiaotong University section of the train speed limit operation, the departure interval extended. At present, the old Ximen Station and Nanjing East Road Station will be implemented to switch into the 10th-line limit. Passengers are requested to adjust the travel route in time.

From the aspect of the subway, it was learned that on the 10th line, sudden equipment failures, manual dispatching and manual driving on the entire line may cause the train to run at a lower speed. It is recommended that passengers transfer to other lines.

She was informed by a passenger Miss Xu from the train that was on the line 10 that her train had stayed in the tunnel for nearly an hour and had had a sudden brake before stopping. She tried to look outside through the window glass. According to what she saw, there were no other trains in the front of the car.

At 15:10, it was learned from the subway that the train at the old Ximen Station on the 10th line had a rear-end train and some people were injured. The rescue operation was in progress.

At present, on the southern road in Tibet, rescue and public security vehicles are rapidly rushing to the scene of the incident.

It was also reported that around 2:30 this afternoon, due to a signal failure at Xintiandi Station, Shanghai Metro Line 10 used manual scheduling, resulting in the collision of two trains at Yuyuan Road Station.

At the scene of the accident, ambulances and police vehicles arrived at the scene and a wounded person was taken out and rushed to a nearby hospital. At present, the trains on the 10th line of the Shanghai Metro from the Yili Road to the North Sichuan Road have ceased operation, and the transfer to the Line 10 line has been stopped. Passengers are requested to adjust the travel route in time.

At present, emergency plans for public transport facilities have been started, and public security and armed police have rushed to the scene to assist in evacuation. The accident is under further treatment.

According to Shanghai Metro's shmetro Weibo news, two trains of Line 10 (Yuyuan Park to Laoximen Station Downstream Section) touched the train, and the train from Ili Road Station to Sichuan North Road Station section was interrupted. Yuyuan Station has taken Stationary measures.

According to Xu Ke, a deputy director of the mobile news department of Shanghai Radio and Television Station Television News Center and reporter Xuan Kejun’s Weibo, there are serious distortions in the cars. At present, more than 10 people have been injured and no death report has been received. The passengers in the car introduced: When the train on line 10 opened to Yuyuan Road, the subway said something was wrong. Stop it for a moment, but it stopped for more than ten minutes and the inexplicable start opened. It took just a few seconds to hear the brakes and the rear-end. Hit.

Carrier Tape Raw Material inculding PS,ABS and PC,which is used for embossed carrier tape to Carrying the Smaller Electronic Components such as IC Component, 

Connector, Resistor, Capacitor & Inductor.The diversified product inculding PS Conductive sheet,PS Antistatic sheet,ABS Conductive sheet,PC Conductive sheet,PS transparent sheet.

 

 

1.Descriptions

1. Width: 200mm~750mm  (Tolerance:  ± 1mm) ;

2. Thickness: 0.2mm~2.5mm  (Tolerance:  ± 0.02mm) ;

3. Length is customized. it can be jumbo roll,slitted roll

4. Density:1.06g/cm3

5. Color: black,Clear

5.  Surface resistivity:

   Conductive:10e4~10e6

   Antistatic:10e9~10e11

   Semi conductive:10e6~10e8

6.  Process:Monolayer  or 3 layers co-extrustion

7. One side is glossy another side is matte

8. Certificates: : ISO9001,REACH,CTI RoHS.


2.Features

 * Available in custom width and thickness within 0.2mm to 2.5mm

* No dependency on humidity.

*Stable surface resistivity

*Excellent dimensional stability for deep-drawing or precision forming.

*Thickness tolerence within 5%.

*Eecellent bending strength

*Good low temperature toughness

*Less Burrs and fines

*Good compatibility with different kinds of Cover Tape

 

 

 

Carrier Tape Raw Material

Sheet For Carrier Tape,Carrier Tape Material,Sheets For Carrier Tape,Flat Sheet For Carrier Tape

Pujiang Yitong Plastic Electronic Co., Ltd. , http://www.yitongplastic.com