[Pump News] stainless steel food-grade small-scale self-priming pump, some of the pump impeller used semi-open structure, while others are closed structure, and the flow of parts and connectors made of high quality stainless steel, with Corrosion-resistant performance, use, easy maintenance, compact structure, low energy consumption, good sealing performance and a series of advantages. Now Xiaobian to introduce the use of food-grade small self-priming pump conditions and methods of use. Small self-priming pump First, the food-grade small self-priming pump conditions 1. Direct-coupled pump over-current liquid temperature shall not exceed 90 ℃, bearing bracket pump over-current liquid temperature shall not exceed 105 ℃. 2. Due to so far adapt to any medium, concentration, temperature, the use of materials, so users of the corrosive media, conditions of use should not exceed the scope of use of the pump. 3. The technical data proposed by the product are measured at room temperature for water, if the transmission medium is not water at room temperature, the pump performance will change, please make appropriate adjustments. Second, the use of small food-grade self-priming pump 1. Before starting, should be filled with liquid pump chamber, pump liquid is not enough to start. 2. Before use, make sure that the motor is steered correctly before it can be used. The correct steering of the semi-open impeller pump is as follows: When viewed from the rear of the motor, the motor blades should rotate clockwise. The correct steering of the closed impeller pump is: Watch, the motor blades should rotate counterclockwise, the test start to electric appropriate. 3. With bearing bracket pump should be used before the bearing bracket cavity into the No. 30 lubricating oil, because the oil level in the oil mirror to keep below, only visible above the oil, oil is strictly prohibited, resulting in damage to the bearings. 4. Should pay attention to check the seal, if serious leaks should be shut down repair, to prevent liquid from penetrating the motor cavity damage to the motor. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter: 2355962924) http://beng.liuti.cn/ (Hotline : 400-6030-811)
