You may feel stranger about passing windows. The transfer window is an auxiliary device for the clean room. It is mainly used for the transfer of small items between the clean area and the clean area, and between the non-clean area and the clean area. This reduces the number of times the clean room is opened, thereby minimizing the number of clean rooms. Pollution in the clean area. Today it, Xiaobian together to understand, the transfer window types and characteristics of it, to buy the Notes window to see which passed under way. 
Transfer window types and characteristics
1. Standard transfer window features
1. The standard transmission window uses circular arc angles that are more suitable for the cleanroom principle.
2. The outer wall uses high-quality cold-rolled steel plate spray.
3. The short-distance transmission window table uses a non-powered roller to transfer items easily and conveniently.
4. There are mechanical interlocks or electronic interlocks on both sides of the door to ensure that both doors cannot be opened at the same time.
5. Can be paired with a walkie-talkie.
2, the characteristics of air shower transfer window
1. Use circular arc angles that are more suitable for the cleanroom principle.
2. The outer wall is a high quality cold-rolled steel plate spray. 
3. The short distance air shower transfer window table is made of stainless steel plate, which is smooth and wear-resistant.
4. The long-distance air shower transfer window worktable is powered by a non-powered roller, which makes it easy to transfer items.
5. There are mechanical interlocks or electronic interlocks on both sides of the door to ensure that both doors cannot be opened at the same time.
6. The outlet speed of the tuyere is more than 20m/s.
7. Using a high efficiency filter separator.
8. With EVA sealing material, high sealing performance.
9. Imported components, reliable performance.
10. Can be paired with a walkie-talkie. 
3, the characteristics of floor-type transfer window
1. Circular arc angles that are more suitable for cleanroom principles.
2. The outer wall of the floor-standing transfer window is a high-quality cold-rolled steel plate, and the interior and top and bottom plates are high-quality stainless steel plates.
3. There are mechanical interlocks or electronic interlocks on the doors on both sides of the floor-type transfer window to ensure that the doors on both sides cannot be opened at the same time.
4, can be paired with walkie-talkie. 
Delivery window purchase notes
1. The transmission window can be transported by ordinary vehicles, but it is necessary to pay attention to rainwater during transportation so as to avoid damage or rust.
2. The transmission window should be stored in a warehouse with a temperature of -10°C~+40°C, a humidity of no more than 80%, and no corrosive gas such as acid and alkali.
3. At the time of unpacking, the operation should be civilized and cannot be brutally forced to avoid personal injury.
4. After unpacking, first check if the product is a product of your choice. Then carefully check the contents of the packing list for missing parts and whether the components are damaged due to shipping.
5. Self-modification phenomenon does not exist within the scope of the warranty. 
Edit Summary: The above is small series about the type and characteristics of the transfer window as well as the transfer window to buy it introduced considerations. I hope that the introduction of this article can help everyone better understand the relevant knowledge of the transmission window , and can correctly understand and purchase the delivery window.
Objective To develop Chlorine Dioxide Disinfection powder packed in single-ingredient that is more convenient for use and transportation. Methods Orthogonal experiment was adopt to improve disinfection powder. Stability test, suspension quantitative bactericidal test, simulation field trial and toxicity test were carried out according to Technical Standard for Disinfection, 2002 edition, Experimental Technical Standard, Ministry of Health, PRC. Results[WTBZ] The results of orthogonal experiment showed that the type of water had no effect on disinfection powder and the best ratio of natrium chlorite to citric acid was 1:3.10 gramme disinfection powder was fully dissolved in 20 milliliter water for 2 minutes, and then diluted by water to 500 milliliter; after 5 to 10 minutes, the concentration of chlorine dioxide could reach 272 mg/?L. After storing at 54 ℃ for 14 days, the average content of chlorine dioxide decreased by 5.03%.In suspension quantitative bactericidal test, the average killing logarithm value (KL) of Staphylococcus aureus and that of Escherichia coli exposed to solution containing 100 mg/?L chlorine dioxide for 2 minutes were over 5.00.In simulation field trial, the average KL of Escherichia coli exposed to solution containing 100mg/?L chlorine dioxide for 5 minutes was over 3.00. The disinfection powder was non-toxic, non-irritative for rabbit skin and had no function of inducing micronucleus of polychromatic erythrocytes of mouse marrow. Conclusions The solid chlorine dioxide disinfection powder packed in single-ingredient has bactericidal function.Such as environment friendly chemical clo2.
Chlorine Dioxide Powder, Pure Chlorine Dioxide, Chlorine Dioxide Granular
Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. , http://www.watermanclo2.com