Many homebuyers will look at the distribution of load-bearing walls and non-bearing walls on the floor plan when they buy a house. See if the wall can be transformed by the transformation of the wall. In fact, whether it is a load-bearing wall or a non-bearing wall, it is a wall that we all should pay attention to. The wall is an important bracket that constitutes the wall. Some small walls inside the house can be removed, because it can be repaired after dismantling. But can the non-bearing wall be demolished? Next, follow the decoration home network Xiaobian to learn about the non-bearing wall can be dismantled , what is the impact of non-bearing wall removal?
Can the non-bearing wall be dismantled?
1. In people's traditional thinking, there has always been such an idea: the load-bearing wall in the room cannot be dismantled, but the non-bearing wall can be removed. This is actually a big mistake. In fact, not all non-bearing walls can be removed at will.
2. The so-called non-bearing wall refers to the house consisting of a column frame of reinforced concrete. The floor is supported by a horizontal array, supported by columns, and supported by foundations. This structure is usually visible in the interior of the column. Most of the walls between the columns are filled with hollow bricks or ordinary bricks, which are generally non-bearing walls.
3. Many people think that non-bearing walls are not heavy, but the actual situation is not the case. Because the non-bearing wall is a secondary load-bearing component relative to the load-bearing wall, it is also an extremely important support for the load-bearing wall. It must bear at least two parts of the load, and part of it is the weight of the wall. Take the six-story house as an example. The non-bearing wall in the bottom house should bear the weight of the five-layer wall above.
4. Another part of the structure, the non-bearing wall is usually designed as a seismic wall. That is to say, if an earthquake occurs, these non-load bearing walls will withstand the earthquake force together with the load-bearing wall.
Impact of non-bearing wall removal
1. For example, it is not too much problem to remove the non-bearing wall or make a hole in the wall. However, if the residents of the whole building are free to dismantle the non-bearing wall, the earthquake resistance of the building will be greatly reduced. According to the experts, the load-bearing walls of some rooms can be removed. The half-brick walls in the bathroom can be removed if the supporting beams supporting the wall are designed in the floor structure, otherwise they cannot be removed.
2, but be careful not to damage the waterproof layer, otherwise you have to redo. Although the brick wall connecting the balcony is not a load-bearing wall, it is generally thicker and has a certain bearing effect on the balcony, so it is best not to dismantle it, especially the old house. In other words, only half of the brick wall or light wall can be removed directly, otherwise it must be dismantled after the consent of the property department.
3, the removal of non-bearing walls may lead to changes in water, heating, and electrical circuits, so these issues should be considered in design. If the owner's decoration design has the intention of demolishing the wall, then the decoration company must submit the application to the property department before approval. When the building is completed, the design unit will leave a copy of the drawings to the property company, and the thickness and material of the various walls such as the load-bearing wall and the non-bearing wall are clearly marked. According to the drawings, the property company can determine which walls can be dismantled and which walls cannot be removed.
Is the above non-load bearing wall removable? The detailed answer to the impact of the non-bearing wall dismantling, I do not know if you are satisfied with the introduction of the decoration home network Xiaobian. If you want to know more about the related content, please continue to pay attention to our section!
Stevia Rebaudioside D,which is a glycoside.
Stevia Rd 95%,Pure Bulk Powder,Bulk Powder Sweetener,0 Calorie Pure Powder
JINING USP INTERNATIONAL CO.,LTD. , https://www.uspintl.com