Decoration and hydropower reform 1. Reasons for hydropower reform
After we got a new house, the house itself has a water and electricity layout. However, because the opener is a unified set of waterways, circuits, switch sockets and other locations, most households will not necessarily follow the pre-opening rules during the use of daily life. The use of the hydropower line method, some switch socket locations need to be changed, and some other uses of the room may also change the location of these reservations, this time we need to change the line, which is often referred to as hydropower reform.
Decoration and hydropower reform 2. Concrete process of hydropower reform
1, according to the design of the house and the specific needs of customers to design the direction of hydropower;
2. Workers are grooving walls or floors according to their direction;
3, buried pipelines (including wiring and connecting pipes) and cassettes;
4, the detection circuit, the water pressure test;
5, smooth the trunking with cement sand;
6. After the wall or wallpaper is finished, install the circuit panel.
Decoration and hydropower reform III. Precautions for waterway reconstruction
1. The water supply pipe should be laid in the wall as far as possible, and it must not be laid in the same slot as the wire and pipe;
2. The water pipe should be left hot and right cold. The spacing between hot and cold water pipes should be 120-150mm.
3. After the connection of the water supply pipe is completed, seal the water outlet to conduct a pressure test to ensure that there is no leakage;
4. Drainage pipe through the pass water test to ensure smooth drainage;
5. Wash basins and sink drain hoses should be equipped with water return bends to block PVC drains to prevent odors.
Decoration and hydropower reform IV. Circuit modification notes
1. The number and location of switches and sockets should be carefully considered when wiring. In principle, it should not be less;
2. The same height of switch sockets in the same room;
3. To prevent children from accidental electric shock, be sure to use a safety socket with a safety cover;
4. Electric appliances that need to be switched on and off frequently, consider using a socket with a switch;
5. Network cables, telephone lines, and television lines must not be put in the same conduit as the wires;
6. Use a lock to connect the new cartridge line and the box.
It is very important to decorate the home improvement equipment during the renovation of hydropower . Therefore, it is very necessary for us to seriously study before we carry out the renovation and hydropower reform . We hope that today’s content can be carefully examined, and if there is anything that we do not understand, You can also leave a small message in the following.
Kitchen renovation hydropower renovation outlet beautiful refrigerator hood disinfection cabinet wire
Daoming Reflective Fabric use different resin, put the hi- reflective index`s glass bread on the base fabric well distributed. Behind all the glass bread has reflective layer coating. When the light was on the surface,glass bread made light source to reflected light beam. The light passes through the incident - refraction - reflection process, showing bright light, forming a retroreflective function.Personal safety reflective fabric applied to fashion, shoes,hat,suitcase, sports, casual, decoration,security, advertisement and etc. Varies of product could meet customer`s customize.The application scene covered almost all the reflective field.
Our product conforms to EN471,australia standard AS/NZS4602 ,OEKO-TEX100 and ANSI107-1991
Reflective Fabric
Reflective Fabric,Flame Retardant Reflective Fabric,Elastic Reflective Fabric.Reflective PVC Vinyl Film
Daoming Optics & Chemical Co., Ltd , http://www.dmreflective.com