Home>Bearing knowledge>Water pump bearing protection |
Pump bearing protection
Source: China Bearing Network Time: 2014-07-01
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
2) Select smooth bearing with smooth grease; after running for 1500 hours; replace the smooth grease; the amount of oil added may not be too much or too little; too much or too little smooth grease will cause the bearing to heat up; The volume of the bearing chamber is 1/2~2/3.
3) Regarding the selection of smooth oil smooth bearings; the amount of oil should be added to the regular orientation.
4) The container with smooth oil or smooth grease should be clean; it should be sealed normally; there should be no dust, iron filings, etc.; avoid.
5) Motor bearings usually use sodium-based smooth grease; this smooth grease is characterized by high temperature (125 ° C); but it is easy to dissolve in water damage bearing; so it can not be used for the smoothness of water pump bearings.
Recommend to friends comments close window
Bearing related knowledge |
Analysis of the damage of the rolling bearing. The current shopping mall bearing classification sliding bearing fault characteristics. The common bearing inner ring fixing method rolling bearing device--heating device method |
This article links to http://
Please indicate the bearing network http://
Previous: NSK Bearing Clearance Method Next: How to Receive the Call for Advice
JIC hdyraulic adapter is a very common connection in fluid power applications. Both the male and female fittings have 37° seat. The seal takes place between the male flare and female cone seat. The threads hold the connection mechanically.
Inculde: ORFS Adapters fittings
JIC 74° Cone Flared Tube A hydraulic fitting and adaptersNPT Thread Adapters
American Tee Adapter fitting
American Hydraulic Adapter,Hydraulic Hose Adapters,Hydraulic Adapter Fitting,Hose Fittings And Adapters
SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com