In today's era, ceramic tiles are almost indispensable materials for home decoration. Tile decoration is like a person's inner being, the appearance of clothes can often change often, but the inner is always with a lifetime, hope that the longer the fragrance. So can't help but look good, durability is the last word. As a rational consumer, the key to our consumption is to live within our means, so we must be inclined to buy more cost-effective tiles!
So, what kind of tile is a cost-effective tile? How to identify cost-effective tiles? Marco Polo offers consumers tips and methods for identifying cost-effective tiles.
First, look at the appearance - look at the color uniformity of the tile, surface finish and flatness is good, the surrounding rules, the pattern is complete, take four or five pieces from a box to see if there is any color difference, no scratches, stains, leaks, leaks Defects such as grinding, missing edges, and missing feet.
Second, dripping test - water droplets can be placed on the back of the tile to see how fast the water is infiltrated. Generally speaking, the slower the water absorption, the greater the density of the tile. Conversely, the faster the water absorption, the density is sparse, and its inherent quality. The former is excellent.
Third, the amount of scale - the higher the accuracy of the length of the tile, the better the effect after the paving, buy high-quality tiles is not only easy to construct, but also saves working hours and accessories. Use a tape measure to measure the size of each tile around the difference, the highest accuracy is the top grade.
Fourth, listen to the sound - gently tap the tile, if the sound is crisp, it proves that the ceramic tile is more porcelain, the better the quality, if the sound is dumb, it proves that the degree is low.
Fifth, observe its hardness - the tile is good in hardness, toughness, and not easy to be broken. Scrub the edges of the tiles with each other to see if the broken pieces are fine or loose, hard, brittle or soft, leaving scratches or scattered powder. If the former is the top, the latter is the quality. Poor.
Sixth, in the same model and the same color number range, randomly sample a number of products in different packaging boxes on the ground to try to shop, stand 3 meters to observe, check whether the product color difference is obvious, whether the gap between brick and brick is straight, down Whether the angle is even.
After selecting the tiles, Marco Polo also has a warm reminder on the installation and acceptance of the tile products. Although the tiles of different brands may be slightly different, the standard inspection recommendations will always help us to a large extent. Although we can't make us an expert, we can always help us understand more.
Guidelines on installation
1. Before use, please check whether the product number, work size and color number marked by the product packaging are the same, and use the same color number and working size for the same plane, and lay it in the same direction according to the product surface (such as pattern). , the effect is better (except for special effects);
Second, before the paving, the surface of the building base should be treated according to the construction specifications (priming, watering, cleaning, cleaning, etc.), and then laid according to the paving plan (elastic line) to ensure the surface is smooth, gray Straight stitching.
Third, according to different varieties and construction requirements, for many products of Marco Polo, polished bricks, regent products are suitable to leave 1mm gray seam; e-era, 628 series products are suitable to leave 2-5mm gray seams, in case of product days It has been subjected to environmental influences to bulge and peel off to ensure the desired decorative effect. It is recommended to use a caulking agent when handling the ash seam, while the ash seam filling is dense, flat and slightly lower than the brick glaze.
Recommended criteria for acceptance
First, the combination of the top layer and the next layer (bonding) should be firm and free of empty drums.
Inspection method: use a small hammer to lightly check (Note: Where there is a partial hollow drum in the corner of a single brick, and each natural room does not exceed 5% of the total number)
Second, the surface of the brick surface should be clean, the pattern is clear, the color is consistent, the joints are smooth, the depth is natural, and the surrounding is straight. The plate has no defects such as cracks and corners (visual observation and inspection)
3. The material and size of the edging adjacent to the surface layer shall conform to the design requirements, and the corners shall be neat and smooth.
Fourth, the surface of the baseboard should be clean, consistent in height, firm in combination, and consistent in thickness.
Inspection method: use a small hammer to tap and check the steel rule
5. The gap width of the stair step and the step plate shall be the same, the tooth angle shall be neat; the height difference of the adjacent step shall not be greater than 10 mm; the anti-slip bar shall be straight. (visual observation and inspection with steel ruler)
6. The slope of the surface of the surface layer should meet the design requirements, without flooding or water accumulation; the joint with the floor drain and the pipeline should be tight and firm without leakage.
Inspection method: observation, splashing water or slope ruler and water storage inspection
7. The tile surface is flat and the height error is less than 1.5mm.
Inspection method: observation or level measurement
In addition, the daily maintenance and care of the tiles is also very important, just like the inner of the people, always have to practice and enrich, in order to truly live longer. The following Marco Polo will introduce you to the care of ceramic tiles:
First, in daily use, avoid using metal sharps, glass ceramics, nails and other hard objects to knock or rub the ground, weight items should not be dragged back and forth on the ground, so as not to scratch the glazed surface, affecting the appearance.
Second, use dry mop as much as possible when cleaning the mopping floor, and use less wet mop.
Third, if there is a scratch on the brick surface, apply toothpaste on the scratch and wipe it with a dry cloth to repair it. If the local damage is serious, the re-paving can be changed in time.
Fourth, the brick and brick joints can be used to remove dirt from the decontamination paste from time to time, and then a layer of waterproofing agent in the gap can prevent mold growth.
Daily cleaning of tiles can be done with detergent, soap, etc. Wash the tiles with soap and a little ammonia and pine oil to make the tiles more shiny. In life, if tea or other daily necessities are attached to the tiles, they should be cleaned in time and cleaned with appropriate cleaning products if necessary.
In the face of the numerous ceramic tile products currently on the market, it is difficult to buy and use the cost-effective ceramic tile products that make us comfortable and satisfied without certain identification and acceptance techniques. Marco Polo friendship reminds: consumers should not only pay attention to the surface when purchasing ceramic tiles, but must fully check the quality of the products; even if they buy good ceramic tiles, they must strictly check the paving and acceptance to obtain satisfactory decoration. The effect; and the subsequent maintenance and cleaning means that the tiles can really accompany us through the long years.
Happiness is to share, sharing is in Marco Polo tiles
Marco Polo’s Mid-Autumn Festival National Day promotion is in full swing, consulting line
Activity details address: http://?ItemNum=4TW2T4KT9BVH
(Click to receive a great coupon)
Our Electrolytic Tinplate is of prime quality, well applicable for food cans, general cans, chemical cans, caps&closures, etc.
1. Technical standard: BS EN 10202, DIN EN 10203, GB/T2520 , JIS G3303
2. Steel type: MR, SPCC3. Thickness: 0.115 - 0.50 mm
4. Roll Width: 600 - 1050 mm
5. Cutting Length: 600-1200mm
Tin Coating: ordinary 2.8 or 2.8g and 5.6g or 5.6g, we can produce according to customer's requests
We can offer scroll cut service upon customers' request.
Prime Electrolytic Tinplate Sheet
Prime Electrolytic Tinplate Sheet,Tfs Tin Free Steel Sheet,Electrolytic Tinplate Sheet For Tin Can,Electrolytic Tinplate Steel Sheet
Jiangsu Guolian New Material Co., Ltd. , https://www.cntinplate.com