Autumn is a season suitable for decoration. During this period of time, the weather is dry, wood boards are not easy to return to moisture, and paints and paints are easy to dry. However, the effect of the fall decoration is good, but during the renovation, attention should also be paid to avoid problems caused by the season and the climate.
Meihao Home Accessories Museum   Barry home curtains
First, avoid placing wood on vents.
In the autumn, the climate is dry. After wood is shipped to the decoration site, it should be avoided at the vents, and the surface should be sealed as soon as possible. Because the wood is air-dried at the vents at this time, the moisture in the wood will be quickly lost, the surface will crack, and small cracks will appear. Therefore, for high-grade decorative panels such as beech to do sealing oil, lock the moisture in the wood, will not be lost. For the wood line used as the edge, the processing method is the same. The wood line is solid wood and the moisture content is higher than that of the veneer. After the wood line is finished, the surface should be oil sealed as soon as possible if the moisture in the wood line is lost. , The wood line will shrink, but also may affect the appearance of the veneer.
Second, the wallpaper must be dried naturally.
At present, home decoration walls are mostly painted with paint or wallpaper. In summer, the air is damp and the doors and windows are open and ventilated to make the walls dry as quickly as possible. In the dry autumn climate, the wallpaper is usually soaked in water before paving, and then the brush is applied. If you open the doors and windows at this time, let the wallpaper that has just been paved is blown dry, and the wallpaper will lose its water quickly and shrink. Therefore, after the wallpaper is attached, it must be dried naturally, and only a small amount of wind is allowed to flow through the air during the drying process.
Third, do not rush to do repairs to the seasonal problems of housing.
In summer, the air humidity is high, and the moisture contained in walls, floors, and wooden furniture is relatively large. At this time, there may be some problems due to the changing seasons, such as the difference in temperature and humidity, such as the shrinkage of the wooden floor, the increase in the gap between the board and the board, and the difference in shrinkage between the wall and the door frame due to the two different materials. There may be gaps, which are normal phenomena that occur during the season transition. In addition, for projects that require maintenance, such as seasonal cracks on the walls, do not rush to repair them immediately. Because if the wall cracks, the moisture in the wall is gradually evaporating. If it is repaired at this time, the wall may continue to crack if the water continues to evaporate. Wait until the moisture in the wall is appropriate to the outside climate, and let the decoration company make a one-time repair. This will result in a more satisfactory decoration effect.
Notice Entrance Decoration Restaurant Decoration Wallpaper Window Coating Interior Decor Home Decoration Decorating Decoration Company Home Furnishing Wallpapers Upscale Curtains Home Decorations Home Furnishing
15 lights, 30 lights, and 60 lights refer to the number of LED components welded per meter length of the LED strip. Generally speaking, the 1210 specification strip has 60 LEDs per meter, and the 5050 specification strip has 30 LEDs per meter. Special There are 60 LEDs per meter. The price of LED strips with different LED quantities is different, which is also an important factor in distinguishing the price of LED strips.
Color temperature
It refers to heating a standard black body. When the temperature rises to a certain level, the color starts to change from dark red-light red-orange-white-blue. When the color of a certain light source is the same as that of the black body, we call the absolute temperature of the black body at that time Is the color temperature of the light source.
Generally speaking, color temperature is not used as an indicator for evaluating LED strips, but many foreign customers will make a special requirement due to the use environment.
The color temperature of the light source is different, and the light color is also different:
The color temperature is below 3300K, and the light color is reddish to give a warm feeling; it has a stable atmosphere and a warm feeling. It is commonly known as warm color temperature.
The color temperature is in the middle of 3000-6000K, and people have no obvious visual psychological effect under this color, and there is a refreshing feeling; therefore, it is called "neutral" color temperature
The color temperature exceeds 6000K, and the light color is bluish, giving people a cool feeling, commonly known as cool color temperature.
Concentrating Ball Head,Lamp Beads 2835,Hlight Warm White Glow,Light Emitting Diode 2835
Dongguan XINYUDA Technology Co., Ltd. , https://www.gdxige.com