Thermal oil pump maintenance

Thermal oil pump maintenance (1) Jog motor, try to see whether the motor steering is correct. (2) Turn on the motor. When the heat-conducting oil pump is operating normally, open the outlet pressure gauge and the inlet vacuum pump as it shows an appropriate pressure. Gradually open the gate valve and check the motor load. (3) If there is an abnormal sound of heat transfer oil pump should stop immediately check the reasons. (4) heat conducting oil pump during operation, the bearing temperature can not exceed the ambient temperature 35C, the maximum temperature shall not exceed 80C. (5) try to control the flow and head of the heat transfer oil pump within the range indicated on the plate, in order to ensure that the heat transfer oil pump at maximum efficiency point of operation, in order to obtain maximum energy saving effect. (6) Regular inspection of heat-conducting oil pump bearings and seals wear, wear larger should be promptly replaced. (7) When the heat transfer oil pump is used in the winter season, after stopping the pump, unscrew the oil drain plug at the lower part of the pump body to release the medium. Prevent the heat transfer oil contains water to freeze the pump. (8) Long-term deactivation of heat-conducting oil pump, the pump should be disassembled, dry the water, the rotating parts and joints coated with grease installed, properly protected. (9) to stop using the heat transfer oil pump, first close the gate valve, pressure gauge, and then stop the motor. (10) Conductive oil pump In the first month of work, after 100 hours to replace the oil, after each 500 hours, oil change time. (11) often check the import and export of heat-conducting oil pump support point is loose, to prevent the heat pump due to support not in place so that the pump to withstand external forces.

 

● Depth control can adjust the nails depth.

● Designed with 2-in-1 magazine applicabel for both brads and nails.

● Quick clear nose for removing nail jams.

● Easy Insurance  design, to use safe, secure.

● Easy-molded rubber handle and ergonomic gun body design operation.

● Heavy-Duty Steel Cap,360° exhaust cover and exhaust air away from users.

DHAOO TOOLS  CO.,Ltd

 

 

 

2 In 1 Combination Tools

2 In 1 Combination Tools,2 In 1 Combination Tools Set,2 In 1 Combination Hand Tools,Useful 2 In 1 Combination Tools,2-In-1 Comb Nailer / Stapler

DAHOO Tools Co., Ltd. , http://www.dahootools.com