Home>Bearing knowledge>Built-in active tensioning wheel assembly and plastic pulley

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Built-in active tensioning wheel assembly and plastic pulley

Source: China Bearing Network Time: 2018-03-03

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The built-in active tensioning wheel assembly is an ultra-small depiction; the active tensioner and the pulley knot are integrated. The main features are: the swinging axle and the device bolt are arranged in the pulley aperture and the micro hydraulic pressure is arranged in the pulley aperture. Active tensioner; it is integrated with the pulley and so on.
The plastic pulley is the plastic pulley; it can reduce the weight and reduce the cost. The main features of the plastic pulley are: the pulley of the plastic product can greatly increase the selection of the shape of the rib and the concave shape. This depiction can also be alleviated. The effect of weight and falling cost.

Recommend to friends comments close window

Bearing related knowledge

Common terms and definitions of rolling bearings (3)
INA stainless steel bearings "use environmental impact compressive strength"
The best repair method for rolling bearings
Analysis of the failure of NSK tapered roller bearing

This article links to http://
Please indicate the bearing network http://

Previous: FAG bearing under static load Next: "Protection has strategy": Easily remove KOYO cylindrical roller bearing oil stain

Pyrite as Fillers Used in Grinding Wheels/ Abrasive Tools

Ablation grinding wheel / abrasive( filling agent )

PYRITE__As fillers used in grinding wheels/ abrasive tools

Place of Origin: Henan Luoyang, China

Pyrite, Iron pyrites, pyrites lump, Ferro sulphur, Pyrites powder.

Product Description

Detailed introduction: is filling agent for ablating grinding wheel abrasive, which can effectively reduce the grinding wheel temperature during ablation, improve the heat resistance, and prolong the service life of the grinding wheel.

Formation of a protective layer
(1)The reaction absorbing oxygen occurs between 400 and 475 degrees, thereby reducing the oxidation of resin, reducing the oxidation burn of workpieces, and prolonging the working life of grinding wheels at high temperature.

4 FeS2 + 11 O2â†’2 Fe2O3 + 8 SO2
(2) 4 FeS + 7 O2â†’4 Fe2O3 + 4 SO2

400-475 degrees is a limit that the grinding wheel can easily reach. The above reaction creates an oxygen-free and hypoxic environment for the grinding wheel at the micro level, thereby improving the high-temperature performance of the grinding wheel.
Decomposition reaction occurs at 650-degree heat absorption, thereby reducing the working temperature of the grinding wheels.

FeS2â†’FeS + S
(3) It enters the melting state at about 1100 degrees, which becomes a good lubricant to protect the grinding wheel FeS(s)â†’FeS(l).

(4)Sulfur, sulfur dioxide and sulfur trioxide react with the workpiece surface to form FexSy:

Quality:

S: 48%min, FE: 42%min, SIO2: 3.0%max, PB: 0.1%max,

ZN: 0.1%max, AS: 0.1%max, . C: 0.3%max, CU: 0.2%max,

H20: 1.0%max, SIZE: 95%min

Granularity: (0-3)mm/(3-8)mm/(3-15)mm/(15-50)mm or other particle size.

Packing: 25KG/500KG/1000KG/BAG or 1000KG/BAG or other packaging.

Note: if there are special requirements, the product can be customized according to clients` requirements.

Iron Sulphide For Resin Grinding Wheel---LHT(SL)

Iron sulphide for resin grinding wheel Pyrite, Iron pyrites, pyrites lump, Ferro sulphur, Pyrites powder

LUOYANG PERFECT TRADING CO.LTD, , https://www.pyritefes.com