Stainless steel gear pump can be divided into 1, KCB stainless steel gear pump, 2, YCB stainless steel arc gear pump, 3,2 CY stainless steel gear pump. According to the material can be divided into 304,316,416 stainless steel gear pump material. Stainless steel gear pump series gear, shaft, pump body, safety valve, shaft seal and other components, the gear heat treated by a higher hardness and strength, together with the shaft installed in the interchangeable sleeve operation. The lubrication of all parts in the pump is automatically achieved by the use of conveying medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear in the work to withstand the torque of the smallest, so the bearing load is small, external lubrication gear pump, wear small, high pump efficiency. The stainless steel gear pump has a safety valve as overload protection design. The full back pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump. It can also be adjusted according to the actual needs within the allowable discharge pressure range. But pay attention to the safety valve can not do long-term work of the valve, arc gear pump, if necessary, can be separately installed in the pipeline. Stainless steel gear pump for conveying corrosive, the temperature is not higher than 120 ℃, the viscosity of 5 × 10-6 × 10-3m2 / s (5 ~ 1500cst) of lubricating oil or other properties of similar lubricants liquid. Uses: Hygiene conditions require higher occasions, such as medicine, food and other industries; In weak corrosive occasions, such as fine chemicals, cosmetics, printing and dyeing, brewing industry.
