Intelligent channel gate maintenance knowledge

Contact: Miss Pan 13714389403

All types of access gates are organically integrated with mechanical, electronic, microprocessor control, and various read-write technologies. They have become more and more popular in recent years, and are often seen in subways, stations, scenic spots, and halls. All kinds of three roller gates, wing gates, swing gates and other types of gates. Then we should use three roller gates, wing gates, swing gates how to maintain the three roller gate gate swing gate it? Then, we will solve this problem for you by Shenzhen Xingchuangheng Technology Co., Ltd.:

First, external cleaning and maintenance

General gates are made of national standard 304 stainless steel, it is recommended to clean the outside once a week.

1, the surface is clean: Use a soft cloth to clean the surface of the dust, with a soft cloth and talcum powder to polish the outside of the chassis, conditions can be coated with anti-rust oil, just coated with anti-rust oil do not wipe by hand, etc. 3-5 About the hour, you can dry it by hand, otherwise it will destroy the effect of surface rust prevention.

2, the use of a long time, especially in outdoor use, there may be some rust spots, remove rust spots: use sandpaper and talcum powder along the long lines to wipe (protect thick grain direction), otherwise it will affect the appearance.

3, if it is the appearance of spraying or painting chassis, use a soft cloth to wipe off the surface of dust, if exposed scratches, use the same color paint to make up, but be careful not to the wing gate, the swing gate of the infrared radiation painted , otherwise the brake accident alarm, causing unnecessary trouble.

Second, movement maintenance

The movement is the heart of the machine and it must be maintained. It is recommended to maintain it once a month.

1. Cut off the power supply, open the cover of the brake, clean the dust on the surface, add the butter after cleaning the drive part first, and apply some butter to the gears and wheel slots of the wing lock and swing gate.

2. Check the fasteners and connecting rods for loosening and tighten them.

3. Check the wear of the wearing parts. The positioning arm of the tripod gate and the positioning plate have more than 3mm gaps and replace them in time. The normal clearance (1-1.5mm) is properly added to the solenoid valve core to make the solenoid valve Reducing resistance during left and right movements, and being lubricated, be careful not to add too much and be moderate.

4. Pay attention to the limit switch and the limit piece of the gate. Do not adjust it to prevent it from being too far or too close.

Third, the circuit power supply maintenance

1, cut off the power, clean the surface of dust. Be careful not to wash with water and prevent short circuits from occurring.

2, according to the previous use, to see if there is a problem in the circuit part, there is no problem, then check the circuit, power supply, wires, plug-ins are exposed or loose, to be bandaged, organize, tighten the plug, check for leakage, if the wire has Aging should be replaced.

3, refer to the gate manual, check whether the various parameters are normal, there are no aging electronic components. There are problems, we must contact the manufacturers, follow the steps, find the root cause of the problem, replace individual electronic components.

Fourth, the above maintenance must have someone special maintenance, especially the movement and maintenance of the circuit part, to go through professional training, full understanding of the strong and weak electricity, in order to post operations.

We have devoted to producing fence for than ten years. Our product category is complete. There are many styles for you choose from, including welded iron wire mesh, hexagonal wire mesh, chain link fence, Garden Fence, barbed wire, razor barbed wire, cattle fence etc.

I introduce several fences for you. First of all, Welded iron wire mesh is available in galvanized and vinyl coated surface treatment. Galvanized provides a smooth and anti-corrosion finish to the wire surface. Vinyl coated provides additional protection from corrosion over the galvanized wire, and blend well with the surrounding.

Otherwise, Hexagonal wire mesh is firm in structure and has flat surface. It is extensively used in building as reinforcement of the roof and floor. It is also used as fence for poultry cage, garden and children playground.

Other styles of fence, I will introduce afterwards.

Fence Products

Fence Products,Horse Fence,Horse Fence Products,Garden Fence

HEBEI HONDE INDUSTRIAL TRADE IMP&EXP CO., LTD. , http://www.hbhonde.com